Agilent Technologies Video Gaming Accessories Agilent Technologies Video Gaming Accessories User Manual

0

Out of 0 Ratings

Owner's of the Agilent Technologies Video Gaming Accessories Agilent Technologies Video Gaming Accessories gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 128
 
Chapter 2 Quick Start
To Check the Rated Voltages of the Power Supply
25
2
To Check the Rated Voltages of the Power Supply
The following procedures check to ensure that the power supply develops its
rated voltage outputs with no load and properly responds to operation from
the front panel.
For each step, use the keys shown on the left margins.
1
Turn on the power supply.
The power supply will go into the power-on / reset state; the output is disabled
(the
OFF annunciator turns on); the 15V/7A range is selected (the +15V
annunciator turns on); and the knob is selected for voltage control.
2
Enable the outputs.
The
OFF annunciator turns off and the 15V, OVP, OCP and CV annunciators are
lit. The blinking digit can be adjusted by turning the knob. Notice that the
display is in the meter mode. "Meter mode" means that the display shows the
actual output voltage and current.
3
Check that the front-panel voltmeter properly responds to knob
control.
Turn the knob clockwise or counter clockwise to check that the voltmeter
responds to knob control and the ammeter indicates nearly zero.
4
Ensure that the voltage can be adjusted from zero to the maximum
rated value.
1
Adjust the knob until the voltmeter indicates 0 volts and then adjust the knob
until the voltmeter indicates 15.0 volts.
1
You can use the resolution selection keys to move the blinking digit to the right or
left when setting the voltage.
Power
Output On/Off

   Find Your Products By Category