Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter User Manual

0

Out of 0 Ratings

Owner's of the Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
46
• To set the baud rate, press CAL/CHECK when set
baud rate panel is displayed. The parameter
value and “CFM” tag will start blinking.
• Press the UP or DOWN keys to select the new
baud rate value.
• Press LOG/CFM to save the change. The new
selected baud rate will be displayed.
Alternatively, press CAL/CHECK to exit without
saving the changes.
LCD BACKLIGHT
The LCD can be illuminated to allow the user to see the readings even in
dark environments.
To turn ON/OFF the backlight, press LIGHT.
The backlight will automatically shut-off after 25 seconds of non-use to
save the battery life.
SET BAUD RATE
The HI 93414 has a RS232 and a USB link. When the USB connection is used, the RS232
connection becomes inactive.
To successfully communicate with the PC, the same baud rate must be selected on the instrument and
on the PC application. The available baud rates are 1200, 2400, 4800 and 9600.

   Find Your Products By Category