Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter User Manual

0

Out of 0 Ratings

Owner's of the Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
10
8) ON/OFF, press to turn the instrument ON/OFF. If no key is pressed for more than 15
minutes, the instrument automatically shuts off.
9) RANGE
, press to change the range. You can choose between turbidimeter or free or total
chlorine range. In SETUP it is used to increase the set values. In Log Recall it is used to
select a newer record (scroll up).
10) ZERO/AVG
, press to set the average reading mode ON/OFF in turbidimeter range. In
colorimeter range it is used to make a zero reading. In SETUP it is used to decrease the set
values. In Log Recall it is used to select an older record (scroll down).
11) CAL/CHECK, press and hold for 3 seconds to enter calibration. In colorimeter range it is used
to check the calibration. In SETUP it is used to start/stop editing a parameter.
12) LIGHT, press to turn ON/OFF the backlight.
13) RCL/GLP, press to enter/exit viewing log content or press and hold for 3 seconds to enter the
GLP feature.
14) LOG/CFM, press to save the log records. In SETUP it is used to confirm the selected option.
15) READ/TIMER
, press to start a measurement. Press and hold to make a continuous
measurement in turbidimeter range. In colorimeter range press for 3 seconds to start the
timer for free and total chlorine measurement. In Log Recall it is used to see the content of
a record. In GLP it is used to see all available informations. In SETUP, during date or time
editing, it is used to move the focus on the next setting item.
16) SETUP/DEL, press to enter/exit SETUP. The DEL function is available in Log Recall to delete
calibration or one/all records. In GLP it is used to delete the user calibration.
CONNECTORS DESCRIPTION
17) AC adapter connector, used to connect an external AC Adapter.
18) RS232 connector, used to transfer data through the RS232 connection. Use HI 920011
serial cable to connect to the PC.
19) Tag reader connector. Touch the tag with the connector to read the location identification
number during logging.
20) USB connector, used to transfer data to the PC.

   Find Your Products By Category