0

Out of 0 Ratings

Owner's of the Brady Label Maker Brady Label Printer gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 267
 
Working with Objects 7-37
2. Press Object Properties to get to the object’s Properties screen.
3. Choose the Size and Location tab.
Note: To set height and width for bar code objects, we recommend that you use
the options on the Bar Code screen Dimensions tab instead of the Size
and Location tab. See
Adding bar code objects on page 7-17 for more
information.
4. Enter a height in inches or millimeters in the Height field.
5. Enter a width in inches or millimeters in the Width field.
6. When you complete all settings changes on the Size and Location tab, click
OK. The size you set becomes the default size for the object.
To set the location of an object
The advantage to using the options on the Size and Location tab to set the location
for an object is that you can choose a precise location. This is useful for laying out
complex labels, or when you want to line up multiple objects on a label.
To set location, think of the screen as a grid with the origin of 0,0 at the upper left
corner of the printable area of the label.
For example, if you set the Left field to two inches and the Top field to one
inch, the object prints two inches from the left of the label and one inch from the
top of the label.
Note: If you previously rotated an object, the Location options are not available.
1. Press Object Properties to get to the object’s Properties screen.
2. Choose the Size and Location tab.
3. In the Left field, enter the number of inches or millimeters from the left side of
the printable area where you want to locate the object.
4. In the Top field, enter the number of inches or millimeters from the top of the
printable area where you want to locate the object.
5. If you have completed all settings changes, click OK. The location you set
becomes the default location for the object.