0

Out of 0 Ratings

Owner's of the JVC Security Camera JVC Security Camera gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 128
 
79
C Firmware Displays the update, the version and the program number of the firmware.
Update Updates the camera firmware and restarts the camera.
Your camera settings are saved. Copy the new firmware file to the computer
where you use the Internet Explorer, and open the file by pressing the
[Browse...] button. Press the [Update] button to start firmware updating.
Current services such as JPEG/H.264/MPEG-4 streaming are all stopped.
The firmware updating may take several minutes.
When the firmware is successfully updated, the message is displayed in
Internet Explorer.
Note:
Do not shut down the system and computer power supplies when the
firmware is being updated and when the camera is restarting immediately
after firmware updating. If the power is shut down, it may cause a
malfunction of camera.
Before starting firmware updating, terminate any access to the camera (by
the viewer or others), except for the access from the Maintenance Page. If
an access to the camera from anything other than the Maintenance Page
is valid, and if you start to update the firmware, the access from this
Maintenance Page may be disconnected. If it occurs, terminate the
access from anything other than the Maintenance Page. Then, access to
this Maintenance Page again and restart firmware updating.
Version Displays the version of the firmware.
Program ID Displays the program ID of the firmware.