0

Out of 0 Ratings

Owner's of the Adam Equipment Building Set Adam Equipment Building Set gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 20
 
© Adam Equipment Company 2012
Page
7
5.0 FUNCTION
5.1 WEIGHING
Place the Scale on an even floor and press the [On/Off] key.
The instrument performs a self-test after which it is ready for operation.
Press the [On/Off] key and the machine switches off.
The person to be weighed can step on to the platform once the scale
shows 0.0 on the display. The weight will be display in Kg. or lb.
depending on the units chosen by the user.
If the weighing value is to be tared press the tare key to remove the
weight value from the display.
Press the [Units] key for changing the weighing unit to kg or lb. The
LED will indicate the chosen weighing unit.
Overload display: When “
FULL
” appears on the display, it shows that
the load on the platform is over the maximum capacity. Under these
circumstances, it is necessary to reduce the load otherwise the sensor
or the platform will be damaged.
Hold Function: To lock the weighing result, press the [Print/Hold]
key. The LED will flash until a stable reading has been obtained and
then it will light up constantly. The weight will be displayed until the hold
time has expired (see Sec 7.0) or to manually release the function,
press the [Print/Hold] key again.
Print Function: To send the weighing result to a printer or computer
press the [Print/Hold] key when the [Print/Hold] key has been set up
in the parameter section to work as print function.