0

Out of 0 Ratings

Owner's of the Adam Equipment Building Set Adam Equipment Building Set gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 20
 
© Adam Equipment Company 2012
Page
11
8.0 RS232 COMMUNICATIONS
The Interface parameters are:
Connection details are:
8.1 RS-232 connection between the Scale and the Host:
DB9 female
RXD pin 3
TXD pin 2
GND pin 5
Note: Pins 1,4,6,7,8 and 9 are not connected.
The RS232 function will only operate if PH has been set to 0 or 2.
8.2 When Parameter S.F. in section 7 is set to 0 :
No RS232 function. The scale will not transmit or receive any data although the
scale is equipped with RS232. The RS232 function can be only activated when the
scale is in normal weighing mode.
RS-232 output of weighing data
ASCII code
9600 Baud rate (fixed)
1 start bit, 8 data bits,1 stop bit
No Parity
Connector: 9 pin d-subminiature socket
Pin 2 Output
Pin 3 Input
Pin 5 Signal Ground