Adam Equipment Building Set Adam Equipment Building Set User Manual

0

Out of 0 Ratings

Owner's of the Adam Equipment Building Set Adam Equipment Building Set gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
© Adam Equipment Company 2012
Page
8
5.2 MEASURING HEIGHT
• To measure some ones height, it is necessary to extract the measuring
rod and place the height arm on top of the head of the person being
measured.
• For shorter heights the height arm can be released by pressing the red
button on the top of the height rod, and then moving the height arm to
the lower section of the height pillar.
• The height is read on the bar at the top of the support. The height can
be read in either centimetres or inches,
5.3 MEASURING BODY MASS INDEX (BMI)
• Once the height has been determined it is possible to enter the height
reading into the display ready for the scale to compute the BMI.
• Press and hold the [Unit/BMI] key to enter the BMI mode. The display
will show the last height value used, “Cm123” or “In123” depending on
which weighing unit you are currently using.
• The height entry unit (Cm or In) will be flashing to show you which unit
you are currently in, use the Up arrow key to change the height entry
unit between Cm to In as required
• Enter your height using the arrow keys, the [Print/Hold] / key will
increment the flashing digit, the right arrow, the [Unit/BMI] / key, will
move the flashing digit to the adjacent digit.
• Press the [Tare]/↵
↵↵
↵ key to confirm the value.
• The display will now show the BMI based on the current weight on the
scale and the height entered.
• Press the [Unit/BMI] key to exit the BMI mode and return to normal
weighing.
• The Hold function will work as described above whilst in the BMI mode.

   Find Your Products By Category