Aiphone Intercom System GT-2C User Manual

0

Out of 0 Ratings

Owner's of the Aiphone Intercom System GT-2C gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 26
 
- 9 -
&$//,1*725220
0(18
6(&85,7<
*8$5'&$//
6(77,1*6
'$7(7,0(
*8$5'&$//
*8$5'
*8$5'
*8$5'
*8$5'
1 When calling all of the security guard stations, press the [ GUARD]
button while in the standby mode.
1 When calling one of the security guard stations, press the [ MENU]
button, select "GUARD CALL", and press the [ MENU] button.
2 Move the cursor to the security guard station to be called and press the
[ MENU] button. The STATUS LED blinks and calls the indicated
security guard station.
• If there is no answer, a call record will be stored in the security guard sta-
tion, and notification of the call will be sent to the security guard.
• On a sub master monitor station also, the STATUS LED will blink.
Calling security guard stations5-1
1 When you press the [ CALL] button, you can call all sub master
stations that are connected to the master monitor station.
• A call will be made to all sub master stations and the STATUS LED will
blink.
• The reply of the other person is not heard.
• On a sub master monitor station also, the STATUS LED will blink.
3 When you are done talking, press and hold down the [ OFF] button.
The STATUS LED will go off.
2 If the other person presses the [ TALK] button, the STATUS LED
lights up and communication between two people is possible.
• Listening is possible with hearing aids with T-mode. (GT-2C-L/GT-2H-L
only)
Room-to-room calling5-2
The unit used in the example pictures is a master monitor station.
5
CALLING
NOTES: 1. Room-to-room communication ends automatically after approxi-
mately 10 minutes.
To perform room-to-room communication again, repeat from the
beginning.
2. If a call is received from the entrance station during room-to-room
communication, the image from the entrance station is displayed at
the master monitor station and sub master monitor station where
communication is taking place. Press the [
OFF] button to end
room-to-room communication, and press the [ TALK] button
to switch to communication with other stations such as entrance
stations.
NOTES: With a sub master monitor station, all security guard stations will be
called. (Selection is not possible.)

   Find Your Products By Category