Aiphone Intercom System GT-2C User Manual

0

Out of 0 Ratings

Owner's of the Aiphone Intercom System GT-2C gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 26
 
- 18 -
3LSLSL
6(1625$&7,9$7('
5(6(7
Prrrrrr
SENSOR1 ACTIVATED.
STOP
(17(56(&85,7<3,1
&/($5
(17(56(&85,7<3,1
&/($5
Canceling security setting after arrival (master monitor station)
Canceling security alarms (master monitor station)
9-5
9-6
1 When the ABSENCE SECURITY setting in 9-4 is set, if an individu-
al door is opened, a screen will display and the alarm will sound.
• At this time, operation other than an emergency alarm cannot be performed.
Ex.: When a call is made from the entrance station, communication will not
start. (The master monitor station is in occupied mode.)
• Even if the call tone volume is set to 0 (OFF), it will sound at a level equiv-
alent to 10 (HIGH).
1 When the PRESENCE SECURITY setting in 9-4 is set, if an indi-
vidual door is opened, the security screen will display and the alarm
will sound.
When ABSENCE SECURITY is set, the security screen will display
and the alarm will sound after t
he DEPARTURE TIMER or ARRIV-
AL TIMER has elapsed.
• Alarms will also sound at individual door stations, and the illuminator LED
will blink.
• Even if the call tone volume is set to 0 (OFF), it will sound at a level equiv-
alent to 10 (HIGH).
2 Press the [ REC/PLAY] to display the security PIN input screen.
Input the security PIN by pressing the [S], [T], [W], and [X] buttons.
• When a security PIN is not used, press the [ REC/PLAY] button to re-
store.
3 Press the [ REC/PLAY] to display the security PIN input screen.
Input the security PIN by pressing the [S], [T], [W], and [X] buttons.
• When a security PIN is not used, press the [ REC/PLAY] button to re-
store.
2 Press the [ REC/PLAY] button or the [ OFF] button.
• The alarm sound will stop.
3 Restoration occurs when the security PIN is correct.
• If the security PIN is not correct, "WRONG SECURITY PIN." will display.
• There is no limit to the number of times the PIN can be entered, but if a cor-
rect security PIN is not entered within the set delay time (10-9 DEPAR-
TURE TIMER, ARRIVAL TIMER setting), a security alarm sounds.
4 Restoration occurs when the security PIN is correct.
• If the security PIN is not correct, "WRONG SECURITY PIN." will display.
• Depending on the settings at installation, an alarm may be output to a secu-
rity guard station.

   Find Your Products By Category