0

Out of 0 Ratings

Owner's of the Echo Universal Remote Bed Redefiner gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 36
 
Be d Re d e f i n e R
Op e R a t O R 's Ma n u a l
11
s u p p o r t h a n d l e
Parts Required: Support Handle, Lower Bracket, 4 - 5 x 35 mm
screws
NOTE
Label shows minimum spacing for front handle location.
1. Assemble front handle and bracket loosely to drive shaft.
2. Position front handle in comfortable operating position and tighten
screws.
MIN
SPaCing
e d g e r b l a d e I n s t a l l a t I o n
1. Remove bed redening blade as shown in “Blade Replacement”
Section. Discard used split pin.
2. Do not remove inner blade adapter (A) or locking tool (B).
3. Install and center edger blade (C) on inner adapter.
4. Install outer adapter (D) and nut.
5. Tighten nut rmly, counterclockwise.
6. Remove locking tool (B).
7. Install new split pin (F) to secure nut.
a
B
F
C
D
E