Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter User Manual

0

Out of 0 Ratings

Owner's of the Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
45
• Press the UP or DOWN keys to set the hour
value.
• Press LOG/CFM or READ/TIMER
to start
editing the minutes. The minutes value will
start blinking.
• Press the UP or DOWN keys to set the minutes
value.
Note: To edit the hour again, after the minutes
were edited, press READ/TIMER
.
• Press LOG/CFM to save the new time. The new
set time will be displayed.
Alternatively, press CAL/CHECK to exit without
saving the changes.
SET INSTRUMENT ID
The instrument ID is a four digit number that can be edited by the user. The instrument ID is
downloaded on the PC application, together with the logged data. By setting a different ID for each
instrument it is possible to mix information from many turbidimeters into the same database.
• To set the instrument ID, press CAL/CHECK when
set instrument ID panel is displayed.
The default instrument ID is 0000. The existing
ID value and “CFM” tag will start blinking.
• Press the UP or DOWN keys to set the new
instrument ID. By pressing and holding the UP
or DOWN keys, the speed will increase.
• Press LOG/CFM to save the change. The new
instrument ID will be displayed.
Alternatively, press CAL/CHECK to exit without
saving the changes.

   Find Your Products By Category