Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter User Manual

0

Out of 0 Ratings

Owner's of the Hanna Instruments Marine Instruments Turbidity and Free/Total Chlorine Meter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 52
 
26
SINGLE SAMPLE READ
• Remove the cuvet from the instrument.
• Remove the cap.
• Add the content of one packet of the specific test
reagent, for:
Free Chlorine Total Chlorine
1 packet of or 1 packet of
HI 93701-0 HI 93711-0
• Replace the cap and shake gently for 20 seconds
(or 2minutes in case of seawater analysis).
• Replace the cuvet into the holder and ensure
that the mark on the glass is matched with the
mark on the instrument top. Close the lid.
• Hold READ/TIMER
for 3 seconds. The display
will show the hourglass blinking and the
countdown prior to measurement.
Alternatively wait for:
Free Chlorine Total Chlorine
1 minute or 2 minutes and 30 seconds
and then just press READ/TIMER
.
In both cases blinking dashes will appear during
measurement.
The instrument directly displays the concentration
in mg/L of free or total chlorine.
Note:If the value is over range, the maximum
value (5.00 mg/L) will blink.
or

   Find Your Products By Category