3M Pet Fence Littmann Electronic Stethoscope User Manual

0

Out of 0 Ratings

Owner's of the 3M Pet Fence Littmann Electronic Stethoscope gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 15
 
12
GB English
13
GB English
To specify Bluetooth mode: Select the BT COMM option in the SETUP menu. Use the (-) and (+) buttons to scroll through the
list of options. The MANUAL option means that the Bluetooth link can be used for data transfers but requires user activation.
The AUTO option means that the Bluetooth link is continuously powered and ready to connect to an external device which it
has been previously paired. Press and release the (M) button to select an option. The factory default is MANUAL.
To obtain model and software version information: Select the ID option in the SETUP menu. Use the (-) and (+) buttons to
scroll through the list of reference numbers. Press “M” to return to the operating mode of the stethoscope.
To leave the Main menu: Press the Filter button or press the (M) button to select the EXIT option. This will return the
stethoscope to its normal operating state.
10. Using the Bluetooth Interface
The Bluetooth interface provides a means of exchanging audio data with external devices such as a Bluetooth-enabled PC.
Audio data can be sent in near real time, permitting their visual presentation, recording, and analysis by applications software
complying with communication protocols used by the Model 3200.
IMPORTANT! The Model 3200 uses a Class 2 Bluetooth link, with a maximum range of 10m. The Bluetooth range will be
reduced when objects (walls, furniture, people, etc) are in-between the Model 3200 and the external device. To improve
Bluetooth communication, reduce the distance and/or allow a line of sight between the Model 3200 and the external device.
With AUTO OFF feature DISABLED:
SETUP Options Detail
POWER HIGH
Remains on full power for 7 minutes before entering standby
Remains in standby for 5 hours before powering off
Backlight remains lit for 5 seconds after pressing power button
MEDIUM
Remains on full power for 5 minutes before entering standby
Remains in standby for 2 hours before powering off
Backlight remains lit 5 seconds after pressing power button
LOW
Remains on full power for 3 minutes before entering standby
Remains in standby for 30 minutes before powering off
Backlight remains lit 3 seconds after pressing power button
To select the number of fi lter modes: Select the FILTERS option in the SETUP menu. Use the (-) and (+) buttons to scroll
through the list of options. With option “2”, the FILTER button cycles between two fi lters modes (bell and diaphragm). With
option “3”, the FILTER button cycles through three fi lter modes (bell, diaphragm, and extended range). Press and release the
(M) button to select. The factory default is “3” fi lters.
SETUP
Id
exit
power

   Find Your Products By Category