Tripp Lite Power Supply PowerVerter User Manual

0

Out of 0 Ratings

Owner's of the Tripp Lite Power Supply PowerVerter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 4
 
Peak output capacity
(watts)
2500
INPUT
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: hardwire
Input cord length DC INPUT: User supplies cabling. 4 gauge or larger (see manual). AC INPUT: hardwire
Recommended
Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 95A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
applications, professional hardwire
Maximum input
amps / watts
DC INPUT: Full continuous load - 95A at 12V DC. AC INPUT: 20 amps at 120V AC with full inverter and charger load
(12A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output lo
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage 12V
Battery recharge rate 14A / 55A (selectable)
LEDS ALARMS & SWITCHES
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off
control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode.
SURGE / NOISE SUPPRESSION
AC surge
suppression
600 joules AC surge suppression included
PHYSICAL
Shipping weight (lbs) 24.8
Shipping
Dimensions (HWD/in)
12.5 x 11.0 x 10.75
Unit weight (lbs) 23.2
Unit Dimensions
(HWD/in)
7.0 x 8.75 x 9.0
Material of
construction
Polycarbonate
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
Cooling method Multi-speed fan
Style Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
16.6 milliseconds (typical - compatible with many computers - verify transfer time compatibility of loads for UPS
applications)
Low voltage transfer
to battery power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95,
105V - see manual)
High voltage transfer
to battery power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145
- see manual)
SPECIAL FEATURES
Appearance Attractive gray color scheme

   Find Your Products By Category