Tripp Lite Power Supply BCPERS300 User Manual

0

Out of 0 Ratings

Owner's of the Tripp Lite Power Supply BCPERS300 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 16
 
5
Storage
Allconnectedequipmentshouldbeturnedoff,thendisconnectedfromtheUPStoavoidbattery
drain.PlacetheON/OFFSwitchintheOFFpositionanddisconnecttheUPSfromitsAC
receptacle.TheUPSisnowreadyforstorage.WhenstoringtheUPSforanextendedperiodof
time,fullyrechargetheUPSbatteriesonceeverythreemonthsbypluggingtheUPSintoalive
ACoutletandlettingtheUPSchargefor12hours.IftheUPSbatteriesaredischargedforan
extendedperiodoftime,theywillsufferapermanentlossofcapacity.
Service
IfreturningtheUPSforservice,contactthelocalTrippLitedealerordistributor.Theywill
provideareferraltoaservicecenter.PleasecarefullypacktheUPSusingtheORIGINAL
PACKINGMATERIALthatcamewiththeunit.Enclosealetterdescribingthesymptomsof
theproblem.IftheUPSiswithinthewarrantyperiod,encloseacopyofthesalesreceipt.
Storage & Service
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product.
You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC RADIO/TV INTERFERENCE NOTICE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the interference using one or more of the following measures: reorient or relocate the receiving antenna; increase
the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that which the receiver is connected; consult the dealer or
an experienced radio/television technician for help. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
EQUIPMENT ATTACHMENT LIMITATIONS (Models with the Industry Canada label in Canada only): NOTICE: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets the telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal
Equipment Technical Requirements Document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also
be installed using an acceptable method of connection. The customer should be aware that the compliance with the above conditions might not prevent degradation of service
in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found
on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series
number. The series number should not be confused with the marking name or model number of the product.
The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.
Made in China.
Note on Labeling: Two symbols are used on the label. V~ : AC Voltage V : DC Voltage
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com

   Find Your Products By Category