Samsung Digital Camera SCB-3020 User Manual

0

Out of 0 Ratings

Owner's of the Samsung Digital Camera SCB-3020 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 23
 
28 – High Resolution Compact ATM Camera
How to use OSD Menu
29
How to use OSD Menu
Note :
You can set the values of R-GAIN and B-GAIN only in AWC
mode.
If AGC is set to OFF or FIX, you can not access the NIGHT
menu.
For adjusting the white balance, the following 5
modes are provided:
ATW1(Auto Tracing White Balance mode 1):
The camera can automatically adjust the color
temperature in real time, according to the ambient
conditions. The color temperature ranges from
approx. 2500K to 9300K.
ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
3200K : Set color temperature to 3200K
5600K : Set color temperature to 5600K
RED : Adjusts the strength of the red color.
BLUE : Adjusts the strength of the blue color.
R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
–
–
–
•
•
•
•
•
–
–
–
–
DIGITAL ZOOM [ON/OFF]
You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.
When the zoom factor and position are defi ned, the
digital zoom function will operate.
DIGITAL ZOOM
RATIO [X1.0]
<LOCATION>
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as
the ratio setting, you can watch an invisible area of
the effective screen as well using the
cdef
switch.
Note :
If the digital zoom factor is set to larger than 1x, the FENCE
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which
can cause deterioration of the quality.
❖
–
–
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC [INT, LINE]
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.
AGC COLOR SUP [LOW , MID, HIGH]
Adjust the color scheme according to the AGC
value.
REVERSE [OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or both.
POSI/NEGA [+, -]
Output as it is or mirror the video brightness signal.
PIP [OFF, ON]
Displays a sub image together with the main image
on the same screen using the Picture In Picture
function.
❖
❖
❖
❖
❖
❖
Note :
If more than one privacy zone is set and the PRIVACY SET is
set to ON, the PIP function will be deactivated.
If the INTELLIGENCE function is set to FENCE mode, the PIP
menu will be deactivated.
DIS [OFF, ON]
Digital Image Stabilization will set the anti-shake
compensation.
Note :
If you set DIS to ON, the compensation area will be enlarged
as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged
zoom factor for the compensation, the DIS function will be
deactivated.
–
–
❖
–

   Find Your Products By Category