Makita Home Safety Product FLASHLIGHT User Manual

0

Out of 0 Ratings

Owner's of the Makita Home Safety Product FLASHLIGHT gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
OPERATING
INSTRUCTIONS
Charging
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it
from the flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery
cartridge into the flashlight all the way until it locks in place with a little click.
(Fig.
1)
Battery
cartridge
ODeratino time
-
NOTE:
Battery cartridges
1200, 1201, 1202, 1202A
can be used on
ML120
if
you install the set plate. Install the set
plate on ML120 with the screw provided as shown in
Fig.
2.
Battery Battery Battery Battery
&"OX.
100
min. ADDrOX.
130
min. ADDrOX.
150
min. ADDrOX.
170
min.
1200/1220 1201 1202/1202Al1222 1233
The following tables indicate the operating time on a single charge.
ML120
Battery Battery Battery
Operating time Approx.
150
min.
Approx.
170
min.
Head angle (Fig.
3)
The head angle can be adjusted in four stages. Adjust as desired
Replacing
bulb
(Fig.
4
81
5)
CAUTION:
The bulb is very hot immediately after operation. Wait until the bulb cools
off
before attempting to replace it.
First, turn the ring counterclockwise and remove the reflector. Then replace the bulb.
MAINTENANCE
To maintain product safety and reliability, repairs, maintenance or adjustment should be carried
out
by Makita
Authorized Service Center.

   Find Your Products By Category