Aiphone Welder Aiphone Welder User Manual

0

Out of 0 Ratings

Owner's of the Aiphone Welder Aiphone Welder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
E-mail tech@aiphone.com
LE-SS-1G Instr.
1011JD
SPECIFICATIONS:
Power Source: Supplied by master station
Speaker: 20 ohms, 4W, 1.92" square, water proof and puncture resistant, 0.44 oz. magnet
Call Button: SPST call button. Call tone rings at master as long as button is held down. LED will
remain lit for approx. 20 seconds (LEF, LEM-3, MP-3S, AP-5/10M only). Call tone
only on LEM-1DL, LEM-1, and MP-1S. Limited stop button.
Communication: Hands free at sub. Master is push-to-talk,release-to-listen.
Faceplate: 12 gauge stainless steel
Mounting: Flush mount into a 1-gang box. Surface mount into SBX-1G, sold separately.
Tamper proof screws included (6x32 for use with flush gang box) with T-10 TORX
bit. Use hardware included with SBX-1G when installing sub into that unit.
Terminations: Color-coded prewired pigtails
Operating Temperature: Speaker rating: -67°F to 185°F (-55° to 85°C)
Switch rating: -40
F to 257°F (-40°C to 125°C)
Wiring: 2 conductors in a 1-master LEF and MP-S system. 3 conductors in a multi-master
LEF system. Shielded cable is recommended. Use Aiphone #822202 for LEM, MP-S,
and AP-M. Use #822202 or #822203 for LEF.
Wiring Distance: See system that unit is being used with for distance specifications.
Dimensions (H x W x D): LE-SS-1G alone: 4-1/2" x 2-3/4" x 1-5/8"
With SBX-1G: 4-9/16" x 2-15/16" x 2-7/8" (Top) 2-1/8" (Bottom)
WIRING DIAGRAMS:
1
(2)
(3)
E
+
-
MP-S/AP-M
+
-
PS-1225UL
(MP-S only)
MP-S/AP-M SYSTEMS:
WIRE COLOR CODE DEFINITIONS:
Red: + side of speaker & call switch, connect to # of master
Black: Common communication, connect to E of master
Blue: - side of call switch
Red
Blk
Blu
LE-SS-1G
Jumper Blue & Black
wires together.
2 conductor
shielded wire
OPERATION:
1. To place a call from the remote station: Press call button once, then release and wait for a response from
the person at the master station. The call tone will be heard at the master for the duration of time the call
button being pressed. The LED will be lit for approximately 20 seconds.
2. To answer the call at the master station: Press the channel selector button with the lit LED, which
indicates which remote has called in. Press TALK button to talk, release to listen.
NOTE: On LEM-1 master, just push TALK button. There is not a channel selector button on that model.
3. Speak hands free at the remote station.
4. To conclude the call, press the OFF button.
5. To initiate a call from the master station to the remote, simply press the channel selector button, then
TALK to speak to the person at the remote.
6. Press OFF to conclude the call.
Intercom wiring must be run at least 20" away from any AC wiring, fluorescent lighting,
dimmer switches, or any other electronic device that may cause interference.

   Find Your Products By Category