Adam Equipment Building Set Adam Equipment Building Set User Manual

0

Out of 0 Ratings

Owner's of the Adam Equipment Building Set Adam Equipment Building Set gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
© Adam Equipment Company 2012
Page
10
7.0 USER PARAMETERS
This indicator has 4 parameter settings that can be selected.
1.
When the scale is in normal weighing mode, press and hold down the [ON / OFF]
key and the [UNIT] key for 3 seconds until ‘Setup’ is shown on the display.
2.
When in the SETUP mode, press the [Print/Hold] key to change the flashing
digits, and [TARE] key to confirm the flashing digits and move to the next
parameter setting. Press the [ON / OFF] key to exit the set up mode.
3.
Parameters setting summary:
Parameter x/xy Factory Set
Setting
A.o.t. 00-15 05
Auto-off time:
No auto-off = 00.
01-15 minutes auto-off time.
P.H. 0,1,2 1
0 = Only Print Function
1 = Only Hold Function
2 = both HOLD and PRINT function (pressed
down less 3s,this key works as Print
function; pressed down more than 3s,this
key works as HOLD function)
H.t 0-4 0
Hold time:
0 = no time limit.
1 = 10 seconds
2 = 30 seconds
3 = 60 seconds
4 = 120 seconds
S.F. 0-3 0
0 = No RS232 Function.
1 = Continuously outputs display data.
2 = Output display data when PRINT pressed
3 = Bi-directional communication (the scale
receives and executes commands from the
HOST device)

   Find Your Products By Category