Acroprint Time Clock ES1000 User Manual

0

Out of 0 Ratings

Owner's of the Acroprint Time Clock ES1000 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 76
 
43
37
Basically, all worked hours are accumulated as regular hours.
By setting maximum length of regular hours per day or week, you can fix how to divide
worked hours into regular hours and overtime.
Semi-monthly and Monthly pay period overtime calculations are based on daily overtime
only. To assure accurate calculations for these pay periods, please select daily regular hours
limit as desired, and select " " as the limit for weekly regular hours. This will
"disable" the weekly OT function so that the clock will calculate properly.
[Daily Regular Hours]
Example: Daily regular hours: 8 hours/day, Break time: start =12:00 & 60 min./day
Overtime Calculation
1
Push the [FUNCTION] button for 2
seconds.
2 Once a number on the display starts
flashing, position the " " mark next
to the "SCHEDULE" mark by
pressing the [FUNCTION] button.
A flashing number can be changed.
3 Push the [+] or [-] button and select
"04". Once you push the [SET]
button, flashing of the display will
change to the "Hour".
You must set limit of regular hours per day (e.g. 8 hours per day).
All worked hours, which exceed the limit, will be accumulated as overtime.
In this case, "regular hours" and "overtime" will be accumulated separately.
Push the [SETTING START/END] button before you start setting. At that moment,
" " is indicated on a display and you go into setting mode.
Set the " 04 Limit of regular hours per day".
SET
FUNCTION
SCHEDULE
SET
FUNCTION
Program No.
SCHEDULE
Hour
IN OUT RH OT OTRH
Mo 9:00A Mo 6:00P
Tu 3:00P
8:00
Tu 9:00A
8:00
Daily Total
8:00
16:00 2:002:00

   Find Your Products By Category