3M Computer Monitor MicroTouch User Manual

0

Out of 0 Ratings

Owner's of the 3M Computer Monitor MicroTouch gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 33
 
Chapter 2 Setting Up Your M170 FPD Monitor 15
Figure 6. Disassembling the LCD from Its Base for Arm Mounting
Step 1 – Unlock front mechanism and
disconnect all cables from the LCD.
Step 2 -- With the unit laying face down safely
and securely on a nonabrasive surface,
remove the two screws connecting the name
plate and support rods to the LCD. Lift the
support rods out of the base and set aside.
Step 3 -- Then remove the four screws holding
the hinge in place and gently remove the base.
M170 Wall-Mount Locking Mechanism
CAUTION
To avoid the risk of minor or moderate personal injury or damage to the monitor:
• Never wall-mount the monitor without the locking mechanism in place.
• Use an anchoring system appropriate for the weight of the product.
• Consult a construction professional before attempting to hang the unit on the wall.
To lock the M170 in place for wall mounting, use the locking mechanism included in a
separate bag with your monitor. Position the monitor to 90° flat and lock the front latch
in place. As an extra measure, insert the U-shaped metal retention clip into the holes in
the base as indicated in the drawing below. Tighten the screw in place and your monitor
is ready to hang securely on the wall.
Figure 7. Wall-Mount Locking Mechanism
3M Touch Systems Proprietary Information

   Find Your Products By Category