3M Air Conditioner 3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit User Manual

0

Out of 0 Ratings

Owner's of the 3M Air Conditioner 3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 20
 
8 78-8113-5099-6 Rev E
8.0 Install Ground Braid
8.1 Select a Scotch
®
Mastic Strip 2230 from kit and remove white release liners. Using light tension apply a SINGLE
WRAP of mastic around the cable jacket 1/4" (6 mm) from cut edge (Figure 10). Cut off excess.
Semi-Con
Cable Jacket
1/4" (6 mm)
1st Scotch
®
Mastic Strip 2230
Figure 10
8.2 Position pre-formed ground braid with short tail over wire shield directly adjacent to cable jacket cut edge. Position
long tail of ground braid, extending over cable jacket with solder block over mastic strip (Figure 11). Secure ground
braid to cable jacket 4-1/2" (114 mm) from cable semi-con edge using vinyl tape (Figure 11).
NOTE: Position vinyl tape with care, it also serves as a marker for positioning the termination.
Shield Wire
Ground Braid
Cable Jacket Edge
Vinyl Tape Marker
Semi-Con Edge
Solder Block
4-1/2" (114 mm)
1st Scotch
®
Mastic Strip 2230
Figure 11

   Find Your Products By Category