4.5

Out of 4 Ratings

Owner's of the Frigidaire Washer Front Load gave it a score of 4.5 out of 5. Here's how the scores stacked up:
  • Reliability

    4.75 out of 5
  • Durability

    4.25 out of 5
  • Maintenance

    4.5 out of 5
  • Performance

    4.5 out of 5
  • Ease of Use

    4.5 out of 5
of 26
 
10
Turn the cycle selector in either direction to the cycle
desired. The indicator for that cycle will be illuminated.
To change the cycle once it has begun, press the cancel
button before selecting a new cycle. Just turning the
cycle selector knob to another selection will not change
the cycle.
Cycle Selection
normal
Use this load for cotton, linen, towels, shirts, sheets,
denims and mixed loads.
casual
Use this cycle for cottons and blends with a permanent
press or no-iron nish.
quick wash
Quickly wash a small, lightly soiled load.
delicates
Use this cycle for lightly soiled knits and delicates which
require gentle washing.
hand wash
Use this cycle to provide intermittent, gentle tumbling
for items labeled “Hand Wash”.
bedding
This cycle is designed for bulky items such as comforters,
blankets, mattress pads, sleeping bags and similar items.
heavy duty
Use this cycle for heavily soiled, durable garments - ex.
towels, sports gear, or fabric tote bags. For best soil
and stain removal, use the hottest water safe for the
fabrics being washed.
whites
Use this cycle for white fabrics and lightly colored
clothing. Refer to fabric care label for use of liquid
chlorine bleach.
spin only
Use the spin only cycle anytime you want to drain
water from the washer and spin out the load or as
a follow-up to a no spin selection. Select the spin
speed appropriate to the load. Fresh rinse is also a
selectable option.
sanitize
Use the sanitize cycle to clean and sanitize heavily
soiled, colorfast fabrics including towels, bedding, and
children’s clothing.
It is recommended that you set your water heater to
120° F (49° C) or higher to ensure proper performance
during this cycle. If the setting is lower or the load
is extra large, the cycle time will be extended by 30
minutes or more.
The sanitize cycle will kill 99.9% of bacteria with
no carryover of bacteria between loads. No bleach or
harsh chemicals are needed, but higher temperatures
are required. Please check fabric care labels to prevent
damage.
The wash water is heated by an internal boost heater
to a maximum of 152° F (67° C) as the load tumbles.
Cold water is added to cool down the load prior to drain
and spin.
As a precaution, the washer door is locked once the
water temperature reaches 130° F (55° C). If the
cycle is cancelled during the wash phase and the
water temperature is greater than 150° F (66° C), an
automatic cool down and drain will occur before the
door can be opened.
NSF Protocol P172
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers
OPERATING INSTRUCTIONS
NOTE
Only sanitizing cycles have been designed to meet the
requirements of NSF P172 protocol for sanitization
ef cacy.
NOTE
If the voltage at your outlet is under 110 v, the internal
heater may not adequately heat the wash water. If
the cycle is interrupted while the water is heating, the
nal temperature of the wash water may be lower and
sanitation may be reduced.
This manual covers many models and not all cycles, options, or features listed are available on every model. Consoles shown
above for reference only. Your model may differ.
Follow the fabric care label
instructions on items
to be washed.
For best results