3M Marine Sanitation System Filter Adapter User Manual

0

Out of 0 Ratings

Owner's of the 3M Marine Sanitation System Filter Adapter gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
3
Product Information
Filter Adapter 603
Issue Date 5/1/09
The 3M™ Filter Adapter 603 is designed for use with
3M™ Particulate Filter 5N11 or 3M™ Particulate
Filter 5P71 and 3M™ Filter Retainer 501.
Features
• Platform for 5N11 and 5P71 N95 and P95
prefilters.
• Enables these filters to be directly attached to all
3M™ Full or Half Facepiece 6000 and 7000
Series Respirators.
Benefits
• The filter adapter 603 may be used multiple
times on all 3M full or half facepiece 6000 and
7000 series respirators.
• Provides cost-effective filtering solution when
multiple filters are needed for elastomeric
facepieces.
– Break even analysis shows savings when
used multiple times (based on suggested list
per pair and similar replacement frequency)
– 5N11 filters x 7 = $25.72
(integrating the 603 and 501 adapters)
– 2071 disc filter x 7 = $26.18
You save using the 603, 501, 5N11 when you
use more than 7 pairs of the 5N11
Packaging and Ordering Information
How to use the filter adapter 603
1. Align notch on edge of 603 adapter with
facepiece mark, as shown, and push together.
2. Turn adapter ¼ turn clockwise to stop.
To remove adapter, turn ¼ turn counter-
clockwise.
3. Place filter into retainer (Part No. 501) with filter
printing facing towards the 603 adapter. Snap
together and ensure the filter seal is free from
creases or gaps.
Part No. Stock ID/UPC
603 70-0707-5800-1
50051138 54376 6
Case Packaging
2 adapters per box,
8 boxes per case

   Find Your Products By Category