Billy Goat Automobile Accessories AET48 User Manual

0

Out of 0 Ratings

Owner's of the Billy Goat Automobile Accessories AET48 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
Part No 361149 Form No F062810A
8
TOW AE Owner’s Manual
HANDLING & TRANSPORTING:
CAUTION: This unit is heavy do not lift.
REMOVE: Drain the water from the weight jugs (see accessories pg. 1) or remove weights before loading and
unloading the unit.
NOTE: The water tank accessory is also heavy (up to 40 lbs.) when it is full of water. The tank should be drained
and secured in place during transport.
USING RAMPS: Use ramps that are of adequate strength for a unit of this weight. When loading the aerator using
ramps be sure the ramp is not too steep and that the surface of the ramp provides good traction.
ENGAGE TINES: With the aerator in the work area, raise both wheels to their upward locked position, this will
lower the tines into the dirt.
TRANSPORT: Be sure to lift the tines out of the ground before transporting away from the work area.
AERATING TIPS
WATER: For the best performance and maximum tine penetration, the lawn should be thoroughly watered the day
before aeration.
SLOPES: Do not aerate on steep slopes. Use extreme caution when operating on any sloped surface. For lesser
sloped areas operate the unit, traversing up and down at a 45 degree angle to the slope rather than straight
across.
TINE PENETRATION: Maximum tine penetration is achieved by the amount of weight that is being used.
TURNING: Avoid sharp turns or high speed turns as this may result in damage to the machine.
PARKING
NEVER PARK THIS UNIT ON A SLOPE OF ANY KIND. Always keep tines in the up position when parking the unit.

   Find Your Products By Category