Tripp Lite Automobile Battery Charger APS2012SW User Manual

0

Out of 0 Ratings

Owner's of the Tripp Lite Automobile Battery Charger APS2012SW gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 4
 
Frequency
compatibility
50 / 60 Hz
Output watts 2000
Continuous output
capacity (watts)
2000
Peak output
capacity (watts)
4000
Output nominal
voltage
120V
Output voltage
regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains sine wave output voltage of 120 VAC (+/-5%).
Output frequency
regulation
50/60 Hz (+/- 0.3 Hz)
Overload protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity /
type
Hardwire
INPUT
Nominal Input
Voltage(s)
Supported
120V AC
Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 250A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum input
amps / watts
DC INPUT: Full continuous load - 250A at 12VDC. AC INPUT: 27 amps at 120VAC with full inverter and charger load
(8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage
compatibility (VAC)
120
Voltage
compatibility (VDC)
12
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage
(VDC)
12
Battery Pack
Accessory
(optional)
98-121 sealed lead acid battery (optional)
Battery recharge
rate
Selectable 6 to 60 amp
VOLTAGE REGULATION
Overvoltage
correction
Overvoltage transfer point - 135V (+/- 3%)
Brownout
correction
Brownout transfer point - 85V (+/- 3%)
LEDS ALARMS & SWITCHES

   Find Your Products By Category