0

Out of 0 Ratings

Owner's of the 3M Power Hammer 3M Cut-off Wheel Tool gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 8
 
1
Important Safety Information
Intended Use
Cut-Off Wheel Tool INSTRUCTIONS MANUAL
25,000 RPM 76 mm (3 in), 20,000 RPM 100 mm (4 in), 12,000 RPM 115 mm
(4.5 in), 12,000 RPM 125 mm (5 in), and 10,000 RPM 152 mm (6 in)
Please read, understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
These pneumatic tools are designed to be used with the appropriate size Type 1 and Type 41 abrasive Cut-Off Wheel for cutting metals. It should only be used for
such cutting applications and within its marked capacity and ratings. Only accessories specifically recommended by 3M should be used with this tool. Use in any
other manner or with other accessories could lead to unsafe operating conditions.
Do not operate tool in water or in an excessively wet application.
Do not use cut-off wheels that have a Max RPM less than the marked RPM Rating on the tool.
To reduce the risks associated with impact from abrasive product or tool breakup, sharp edges, hazardous pressure, rupture, vibration and noise:
•Read,understandandfollowthesafetyinformationcontainedintheseinstructionspriortotheuseofthistool.Retaintheseinstructionsforfuture
reference.
•Onlypersonnelwhoareproperlytrainedshouldbeallowedtoservicethistool.
•Practicesafetyrequirements.Workalert,haveproperattire,anddonotoperatetoolsundertheinuenceofalcoholordrugs.
•Operatorsandotherpersonnelmustalwayswearprotectionforeyes,ears,andrespiratoryprotectionwhenintheworkareaorwhileoperatingthis
product.Followyouremployer’ssafetypolicyforPPE’sand/orANSIZ87.1orlocal/nationalstandardsforeyewearandotherpersonalprotectiveequipment
requirements.
•Wearleatherapronorotherprotectiveapparel,takingintoconsiderationthetypeofworkbeingdone.
•Neverexceedmarkedmaximuminputpressure(90psi/.62Mpa/6.2Bars).
•Propereyeprotectionmustbewornatalltimes.
•Toolshallnotbeoperatedinthepresenceofbystanders.
•Ifyounoticeanyabnormalnoiseorvibrationwhenoperatingtheproduct,immediatelydiscontinueitsuseandinspectforwornordamagedcomponents
(mountinghardware,abrasiveproduct,etc).Correctorreplacethesuspectcomponent.Ifabnormalnoiseorvibrationstillexists,returnthetoolto3Mfor
repair or replacement. Refer to warranty instructions.
•Neveroperatethistoolasacut-offwheeltoolwithoutallguardsorsafetyfeaturesinplaceandinproperworkingorder.
•Priortouse,ensureguardisorientedtoprotecttheoperatorfromyingfragmentsandisproperlysecured.
•Donotremoveordisablesafetyfeatureofon-offcontroldevice.
•Makesurethetoolisdisconnectedfromitsairsourcebeforeservicing,inspecting,maintaining,cleaning,andbeforechangingabrasiveproduct.
•Onlyusewheelretainersandwheelarborssuppliedby3M.
•Priortouse,orifdroppedorjammed,inspectwheelretainersandwheelarborsandabrasiveproductforpossiblechips,cracksorotherdamage,and
insure the abrasive product is correctly secured. If damaged, replace with new abrasive product and wheel retainers and wheel arbors available from 3M.
3
ExplanationofSignalWordConsequences
Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,mayresultindeathorseriousinjury
and/or property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injuryand/orpropertydamage.
WARNING:
CAUTION:
WARNING
Original Instructions